The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

It's OK to peg the gauge -- you want to monitor the low end. 200 1991

re: "...It will work but it might max out at times...."
Mercedes-Benz owners would all get a laugh out of that.
All M-B's (until late '90's, when they eliminated the oil pressure gauge altogether) have always had oil pressure gauges that normally "pegged" (at 3 Bar) as soon as the rpm went over about 1,000 rpm. I can't tell you how many times new MB owners would write to the MB lists asking if this was normal -- it was completely normal, and a sign of serious problems if it didn't max at 1,500 or more. Moreover, MB owners manuals clearly say that it was acceptable for the pressure to drop as low as 1/3 bar (i.e, a mere 5 psi) at idle, although I never heard from anyone who saw less than 1-1/2 or 2 bar at idle.
Lest I ramble on some more, I think that the point here is that MB, reflected in the specifications of their oil pressure gauges, felt that it was unimportant to know how high the pressure rose, but was very important to know accurately how low the pressure dropped at times. So you should use your gauge without worrying that it couldn't show the maximum pressure -- it's the low end that you want to know about, and the 3-bar gauge can show that more precisely than a 5-bar gauge, viz. the scale on the gauge.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.