The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

I replaced the A/C expansion valve but I am not sure about where to connect the sensor wire. 200

posted by  someone claiming to be dhalljr on  Tue May 20 03:36 CST 2003 [RELATED]

kyle

Do you mean the pigtail? Mine was originally stuck inside the evaporator cover.
I remounted it to the outlet pipe of the evaporator. The suction line. It is in contact w/ the copper via zip ties.

I refilled my system w/ freeze 12. I did not change evaporator or condensor and I get 50-60 degree vent temp (w/ old needle thermometer) making short trips around town. These temps probably won't be possible as the deep south heats into the 90's and 100's. Or if they are I'll have to drive half an hour to cool it off,

BTW I also added a generic 14'' pusher fan.

Danny Hall





USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.