The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

544 update questions 444-544

As John says front discs from 1800 are a fairly simple job, mine worked perfectly on the PV with no further modifications required.
Re 140 rear axle, sure it will fit, on my other car we raised the floor under the back seat and fabricated new mounting points for all four arms, the panhard rod mount needed minor modification, springs lined up with original turrets, axle is not too wide but only just. this was a major job, we also fitted 140 front suspension so wheel bolt patterns match and track is the same front to rear, the 140 track is about 100mm wider than the PV, you can see some photo's here
http://volvoadventures.com/544PVHans.html
Re 75 B20, it will bolt straight in, if you can't/don't want to use sidedrafts weber/delorttos use SU's.
Regards
Hans






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.