The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

help with engine noise 200 1987

I can think of three things which could get noisy in that area. First would be the timing belt tensioner bearing wearing out. The belt wouldn't be noisy. Sometimes a water pump will get noisy when the bearing start to go. Last would be the rubber in the harmonic balancer/crank pulley slipping.

To check the balancer/pulley, draw a chalk line radially across the inner and outer parts of the pulley. Run the engine, stop the engine and see if the chalk marks on the two part still line up. If so, good. If not, you need a new balancer/pulley.

You could go to a place like Harbor Freight and get their mechanics stethoscope. With this you can apply the stethoscope probe right to the water pump, for example, and listen to the sound of the bearings up close and personal. It's harder to listen to the tensioner bearing since it is covered up. You could decide to replace the timing belt anyway and while in there check the tensioner.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.