The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

PUZZLER - INSTRUMENTS LIGHTS OUT??

'89 & '90 Inst. light cluster circuits look the same in Bentley manual diagrams...

+12 comes in on brown wire via cluster Conn. 31 socket 10. That's the round plug with the half-moon key in center.

Ground is via black wire leaving via cluster Conn. 32 socket 4. Smaller crescent shaped plug.

If you have some wires, put 12v on PIN 31/10 (match pin to brown wire socket on plug), and ground PIN 32/4 (black wire on plug).

If no lights then, must be a board circuit open. Or all 3 bulbs are out. You cleaned the contacts. Did you check bulb continuity or put voltage on them directly?


--
Bruce Young, 940-NA, 240s galore (one V8 just sold), '73 142, '71 144 (ex circle track car in CT), '67 144 (new), 122 '63 to '67






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.