The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

How do I hotwire AC clutch for removal? 700 1987

Hi -

I really don't know exactly how to hot wire the clutch on a 740 a/c Diesel Kiki compressor. I have all 240s. This is an estimate.

Usually there is a single wire from the clutch, black or just real grimy, that runs towards the back of the compressor. Somewhere, maybe near the compressor, there should be a connector which can be disconnected, thus isolating the clutch. Then you can apply 12v to the wire to the clutch from whatever is near.

I do have a question about one thing in your post:
"The clutch is slipping, and the compressor turns freely w no binding"
If the clutch is slipping, how can you turn the compressor?

I would try this: With the drive belt removed, hot wire the clutch and then see how the compressor spins. BTW, In my experience the clutch can slip because of a loose drive belt - in a 240 which may not be the case in a 740.

Good Luck,

Bob

:>)






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.