The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Hot start problem diagnosis 700

Now that the temp has climbed to close to 100, my start hot start problem on my 745T is quite frequent. It started in june, but happened once in a great while. I started carrying around a jumper wire and multimeter as suggested by my mechanic so when it did happen I could attempt to diagnose it. So saturday night when it happened I connected a wire to the spade terminal where the where the small blue green wire goes on the solenoid, turned the ignition key on, touched the battery with the other end of the wire, and it starts right up. Does this mean it is wiring? I replaced the nuetral safety switch when it failed several months ago. My mechanic has suggested adding a relay that supplies 12v from the battery as my jumper wire does. Car starts fine any other time. Thanks for any input.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.