The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

'71 B20E tuning 140-160

Correct plugs are NGK BP7HS, which are colder than the ones for carbureted cars. It makes some difference. I've had good results with B8HS (colder yet), although they are not available with the "projector tip" (what the P stands for).

Assuming the D-jet is feeding the motor the right stuff, no leaks, distributor in good shape, etc., what's going to make the difference is the timing advance curve. There are two springs under the breaker plate that can be seen through holes in the top if you turn the motor to the right positions. There's a metal tab that holds the outer end of each spring. Carefully (!) bending those tabs outwards delays the onset/amount of advance at mid-rpm.

Experiment with that, and with the overall timing setting. I've had good results using plain 92-octane, idle timing 14 BTDC (less will feel boggy in the low end) without vacuum (leave it off), and bending adjusting the tabs so full advance doesn't happen until over 3500 rpm.

--Phil S.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.