The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

B18 PCV hose size? 444-544 1963

Hello all--I'm in the process of converting my B18 from the snorkel-style passive crankcase breather to a PCV setup. Have installed the later type oiltrap with an off-the-shelf Purolator PCV valve, run straight into the hose barb on an iron intake/exhaust manifold. I retained the original oil filler cap since it's a free breather--my guess is that it should work the same as the later hose-fitting equipped type whose hose normally runs to the air cleaner.

Anyway, so far I'm experiencing a very poor idle and stalling when accelerating from a stop. Once RPMs are up everything is great. I'm wondering if I could be using too small a PCV hose: I'm using 3/8", since that happened to be the size of the PCV valve and hose barb I found lying around. Anyone know what the stock hose size would have been?

Any other tips on the PCV's effect on tuning (possible leaning of mixture?) are welcome, as this my first foray into no-snorkel territory.

Thanks--
Nathan






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.