The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

1980 262 with 4 cylinder conversion won't start 200

1985 conversion went into this Volvo. Car originally was not shifting into overdrive so checked fluid levels they were low.After a quick test drive I parked it and shut the engine off. Haven't been able to get it started since. Checked the fuses at fuel pump relay changed the relay still no power to fuse number 5. When I wire from 7 to 5 I do get the fuel pump to work but it still won't start. I'm thinking it might be the ignition switch. Pulled number one plug it is dry absoulutely no fuel getting into cylinders. At same time I checked for spark at number one wire I do have spark. 25 amp fuse under hood is good. Radio and dash lights have not been working lately. Radio is an aftermarket. Any ideas would be appreciated!






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.