The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Wiring Harness cancer 200

posted by  wndsrfr on  Tue Sep 2 04:28 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Sep 29 19:41 CST 2011
[RELATED]

'82 240DL with Kjet--Can I jumper the power to my coil around the wiring harness cancer at the connectors on the starter solenoid? It seems that the brown wire that goes to the "+" on the coil is supposed to come from the ballast resistor--where is the ballast located?--I can't seem to find it anywhere, but would like to jumper directly from it to the coil to get around the area that the wires have shed their insulation at the starter end of the harness, which disappears behind the fuel distributor & I can't get at it there. The white/red wire on the "-" seems to be intact and healthy--I think it goes to the ignition control unit behind the passenger side headlight. Anyone done this before?

Thanks,
John





USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.