The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

240 Fuel pump relay 200

Sorry for the delay Dave,

I believe Bentley over-simplified the Fuel Pump Relay "signal". I'm not sure of all the pin #s, but according to Bentley's diagram (p390-46) the "RPM" (Impulse) sender #197 feeds the Ignition ECU"211, which sends an "OK" to the Fuel Injection ECU" 214, who (delighted beyond measure) puts a ground on its Pin 20, and thus via the Blue/Green wire to Fuel relay #217, terminal 86-2. Or should.
--
Bruce Young,
940-NA (current)
'80 GLE V8 (Now gone)
'83 Turbo 245
'73 142 (98K)
'71 144 (track modified--and going to be crushed unless...)
New 144 from '67 to '78
Used '62 122 from '63 to '67






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.