The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Removing Rear Hub on '64 PV 544? 444-544

Thanks everybody. I found the hub puller in the J.C. Whitney catalog and thought I would see if I could find one in my town of 40,000. I went to the three biggest auto parts stores that rent tools and none of them sold or rented the tool like the one in the J.C. Whitney catalog. But one of the palces said if anyone has one it would probably be the tractor supply/machine shop. The tractor place did have one that he would loan me. It is exactly like the one in John's picture above. I have one wheel alreay done (put on new wheel cylinder). I have the other hub/drum off and will replace that wheel cylinder after work tomorrow. It does really require that puller and when it finally lets go you get a big "POP". It isn't all that bad if you have the right tool and right procedure.

Thanks again Brickers.

Mike






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.