The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Figured out cold start problem, need guidance on where to go next 200 1980

Hi all-

I posted a week or two ago about a cold start problem with my 1980GT. The only suggestion was that I had a problem with the warmup regulator. Yesterday, I decided to take a minute and see if the cold start injector was working, since it's right on top and easy to access. Lo and behold, crank but no fuel from it. Checked with a voltmeter on the wiring, no voltage. Jumped the injector straight to the battery, and a really nice jet of fuel comes out.

So I start thinking it must be the thermal time switch... but then, it occurs to me, that this car isn't started with the ignition switch, there's a pushbutton on the dash rigged up by the PO. Obviously, that's the first piece of the problem, no signal to the TTswitch from the ignition.

My question is, on a theoretical level, should I just hook the pushbutton start button to the TTswitch? Maybe just hook the start button straight to the cold start injector? Or should I take the time to figure out why the key doesn't start the car anymore? How big a deal is it to troubleshoot the ignition switch?

The car is pretty nice, all original, rust free, so I don't really want to make a mess of it. OTOH, there are a fair number of odd looking wiring fixes and jumper wires running around the engine bay already.

Many thanks for any advice... this board is awesome.
Kyle
--
1980 242GT 197K, 1990 744Ti 113K






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.