The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Repost B230E alternator 200

posted by  Nmaslan on  Wed Sep 17 16:22 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Dec 30 18:34 CST 2011
[RELATED]

Hi,

Initially I posted this in the 700 forum then it occurred to me that B230E was more readily found in 200 series. I think the US never got any 740 with B230E? So I thought this forum would be a better place to get some help.

I've just finished doing the bushings and the voltage regulator for my alternator. FYI the alternator on my engine is in front of the oil filter. It's a double belt configuration with a 10 mm adjustment bolt on top. One bushing on the engine block holding the adjustment bracket and two underneath the alternator.

Previously the alternator was cocked towards the water pump pulley which as a result the square looking nut thing (that the adjustment bolt screws into) is resting on the water pump pulley. The pulley has "eaten" into almost half of that nut exposing the thread for the bolt inside. Adjustment bolt was also bent.

I've put in a new bolt and a new "adjuster" nut (don't know the proper name for it). alternator belts nicely alligned. Adjuster nut now is not touching the pulley but it is SO CLOSE to it for my liking. I'd say 1/8 inch or less.

Question is - is this how it is supposed to be? Another thing is that the adjuster nut actually can be positioned 2 ways - with either the bolt on top or the bottom if you swing it around 180 degrees. If the bolt is pointing down then it would be clear of the pully BUT then CLOSE to the alternator fan instead! Haynes does not have any picture of an alternator with the same setup as mine. I'm sorry I don't have any pictures to make things easier.

Any B230E owners out there that can help me? A picture would be most helpful.

Thanks a lot






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.