The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Wiring harness differences79-82 200

From Dave's Wiring Harness Page I gather that the 79-82 engine harnesses should all be the same.

I found a '79 that looked perfect, but it had a smaller connector block at the firewall. No sweat, that explains the "adapter" mentioned on the above page.

Then I found a couple '80's, but they were junk. On to 81/2. Here's where it gets weird. They had the correct large connector... but instead of all 7-8 wires running down to the block, a couple ran over to a second large connector, and wires from this second connector ran back to the engine harness assy, where they were taped in with it. On top of this, wires from this second block ran straight back into the firewall.

Needless to say, I didn't find a usable harness, but I'm seriously confused. What's this second connector block? What is it running to inside the car?

Curious/Furious
Kyle
--
1980 242GT 197K, 1990 744Ti 113K






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.