The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

All back together but still can't bleed clutch. Need advice. 700 1988

I just finished the clutch job tonight by getting the driveshaft back in and spliced in some new wires to the trans harness.

Anyway, I've tried and tried to bleed the clutch but still no dice. I've used my vacumn pump, done it manually with my wife pumping the pedal and it gets close, but not quite there. I can start the car and get it into third but no other gear engages as the clutch isn't disengaging completely.

Each time we start to bleed I get a good spurt of air, then clear fluid for another 4 or 5 cycles.

I'm having her pump twice and hold while I crack the bleed screw and watch the fluid in a clear tube to a can half full of fluid.

Any suggestions would be really appreciated as I'm near the end of my rope and Leigh is starting to complain about the dead 740 in the back.

All this after may last post regarding bleeding too.

Thanks,
--
Erwin in Memphis, '88 745t 190,000 miles, '95 855t 92,000 miles






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.