The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

B230FT not starting.

Is it ok to use ATF? I read somewhere on this board that the detergents/etc. in the ATF are good for conditioning the piston seals. When I had the head off the piston had some play and could be rocked back and forth in the bore. She had some good piston slap when running. The time I oiled the pistons was when she ran the longest. I need to re-re-test the fuel system more thoroughly then probably replace the FPR and reoil the cylinders and try and restart. I don't think it is getting enough fuel and the compression is crappy. I'll need to check the injector seals as the injectors went in with dificulty, which I'll pull the check FPR and the operation of the injectors.
Thanks for all your help.

How is the job market near Cape Cod? I am origanally from Northampton and went to undergrad at UMass. I'll be moving back to MA with my wife and 2 kids when I finish my masters here at NC State.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.