The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Are you aware? 200 1987

There are 2 other seals under the timimg cover which fail as frequently as the cam seal. Unless you removed the cover it is not possible to know which is leaking. These seals should normally get replaced all at once as a preventive measure while doing a timing belt change.

Don message was not referring to the rear main seal, he is referring to the plug at the rear of the valve cover which often leaks or worse still blows out under crankcase pressure.

As Don says a leak on the air intake bellows tube would not affect crankcase pressure. Is that the plastic pipe you refer to? Make absolutely sure the small brass nipple for the flame trap vacume line is clear. You can "feel" for crankcase vacume by applying your palm over the oil filler opening, in a few seconds a very slight vacume will build, you will feel it release when palm is removed. Do this before engine gets hot.

--
David Hunter






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.