The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Bushing kit 200 1978

FCP Groton has a kit but they say it's for 1981 cars and up. You could call their toll free number (ask for Nick) or send an e mail (direct it to the attention of Nick) and inquire. If they don't have stuff they can usually get it and still for less than most others.

If the '78 is the same basic set up as the later cars, and I believe it is, you need front trailing arm bushings (one for each side), rear trailing arm bushings (one for each side), four torque rod bushings (two for each side and they're all the same) and one right and one left track rod bushings (slightly different from one another and don't interchange). But the actual bushings themselves for your car will be a little different from the later cars so make sure you get the right ones for your year.

Ask by whom the bushings are manufactured. The general consensus on bushings made by Scan Tech is that they are of inferior quality. I would avoid buying them.
--
'80 DL 2 dr






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.