The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Bushing kit 200 1978

posted by  Trev29 on  Tue Nov 4 11:08 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 17 05:56 CST 2014
[RELATED]

The machined part acts as a pusher that pushes the bushing into the coupler. Its outside diameter is the same (or a little less) as the bushing because it pushes against the bushings outer metal sleeve and has to enter into the bushing bracket to completely push the bushing out. So since you bought a coupler into which the bushing fits, the machined part being about the same diameter should also slide into the coupler.

Note however that the bushing you are removing may be a bit larger in diameter and so may jam in the coupler. So it may be a good idea to file down the threads in the coupler on the side that will be accepting the bushing. When I pulled my TABs they stuck, but I couldn't be bothered setting up a rig to rotate the coupler while I filed the inside threads. Removal ie. bolt/nut turning was therefore a lot harder and when removed I had to knock the bushing out of the coupler using the machined part inserted from the other end with a hammer.
--
1980 245 Canadian B21A with SU carb and M46 trans






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.