The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Burning oil smell.....leaking out of valve cover filler cap area 900

I had a similar problem on my 245. I'd cleaned out the PCV flame trap with carb cleaner, and made sure the hoses were clear. still leaking.

then replaced the oil filter gasket and the breather box below the flame trap. still leaked out the top.

recently simply replaced the flame trap with an all new one. and replaced the pcv hoses that had cracks at the ends.

it is now much better. I'm guessing one of the pcv hoses was leaking in enough to diminish the vacuum that should have been pulled, or the restriction from even my recently cleaned flame trap was enough to cause the problem.

If I were you, i'd replace the flametrap, and make sure the pcv hoses are in good condition. if that doesn't do it, then try replacing the breather box, or worrying about high blowby.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.