The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

driveshaft need balancing? 200

quick history:

1988 240 dl with M47

Problem: shift knob bounces up and down on grooved freeway

Solution #1: replaced tansmission and engine mounts

no change

Solution #2: replaced center driveline center bearing and rubber mount.....and while I was under there and replaced the flex disc (M47).

New problem: Now my driveline vibrates.

I took the time and care to mark everything so that I put everything back together correctly. ie. rear driveline to differential coupling, and front and rear sections of the driveline before pulling the two parts apart to get at the bearing.

Everything seemed to fit together properly, nothing looks suspicious, and my U joints seem fine.

Question: Do I need to take it in to get the driveline balanced? or did I screw something up putting it back together.

Thanks in advance, this board is great!
--
Ryan - '68 122, '88 240 DL (5 spd)






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.