The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

electrical problem - lighting 200 1987

For the 240, my wiring diagram shows the R stop to be Yellow and L stop Yellow/Grey. The backup lights are on a black wire.

Since all these problems seem to have happened together, I'd suggest checking the connections back at the rear. Each taillight combination has a flexible printed circuit board. The sockets fasten to these "boards" and the power comes in through connectors which go to the copper circuits on the boards. This copper can corrode and make poor connections. Also I've had the wire connectors make poor contact at the boards. You should start where the wires come in from the front of the car and clean and tighten that connector first. If it was loose, it could affect both stop lights and the backup lights. Check the voltage back at these wires at the connector to be sure there is no break forward of the connector.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.