The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

'85 240 R134a retrofit kit - where do these parts go? 200

I'm preparing myself mentally for doing the R12 to R134a retrofit. The R-12 has already been removed. I bought the Volvo retro kit from FCP Groton, but no instructions came with it. Most of it I think I can figure out, except:
1) Where does the T-connector go (with threaded fittings on the straight-through part, and a Schraderesque valve on the side)? With the receiver/dryer?
2) Yellow O-rings - comes with a packet of several, but doesn't say where they go. Maybe this will become evident once I get started.
3) Do I need any thread sealant (as mentioned in my Haynes book), and if so, what type?
Still got to get a replacement compressor for my failed unit. Assuming I get a rebuilt R-12 type (with ports on the back), is this where I should put the ester oil that comes with the kit?
One more thing -- do I need flare-nut type wrenches for this job, or regular open-end? (and, any other special tools?)







USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.