The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Leaky oil separator/block seal 900 1993

posted by  Brian S on  Tue Dec 2 02:56 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Anyone ever had a problem getting a good seal between the bottom of the oil separator, and the block? I had noticed some oily residue in that area, so this morning I pulled back the manifold and removed the box:



Yuck! I had pulled & degreased the separator about 10 months, 6500 miles ago... also fitted a new O-ring, which still looked pretty fresh today. I guess I may not have seated the box properly when reinstalling last time, though the oily mess just became apparent a few weeks ago.

I cleaned things up and put on a new O-ring before buttoning it up, and will check again in a bit. I should mention that pulling the separator & inspecting this area was much easier with the manifold unbolted. This was the first time I've had the mani off... not tough work at all.

- Brian '93 945T 112,970 miles






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.