The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

B20F, how much power? 444-544

You can probably get similar power with a set of well-tuned SUs.

The K cam will move the torque curve down the RPM range a bit, and actually make a bit less HP than the D that's in there now. The difference is probably not noticeable in daily driving. Not recommended.

Have a good local shop build a 2-1/4" (minimum) exhaust system with as few bends as possible -- go under the rear axle -- and with the muffler as far back as you can fit it.

You can raise power further by increasing compression -- a thin head gasket and some shaving of the head is better than a regular head gasket and more shaving -- and having someone who knows what he's doing (unlike me) open up the sharp radius in the exhaust ports. And of course, get a good all-angle valve grind while the head's off.

After that, you're looking at some real money...






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.