The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Is this a usable engine or junk? 200

If the engine that sat is out, and it seems to be out of the car you want it in, I think I would refesh it...

have the head off and bench test the valves with keroscene in the combustion chambers looking for leaks..

Pull the pistons, have the ridge reamed and the bores honed, and install new rings, and perhaps new rod bearings. Inspect the oil pump...

The valves... The once that leak K-1 should come out and be inspected, and replaced and surfaced as needed...

A comp test on a stored engine is not exactly valid, and when that engine is cold worse yet. You have some decent reading however, andd running alone should improve them, but why not just know the engine has been made sound before you install it?
The gaskets will cost more than the valves and the rings combined probably.. Mac






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.