The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

any other sources of driveline vibration other than Tailshaft bushing and Center bearing? 200 1986

I'm really bummed that after replacing my Tailshaft bushing and my Center Support bearing there is still vibration from what I think is my Drive Shaft.??

I believe that I realigned my driveshaft correctly... the front U-joint and the rear U-joint are parallel, the marks I made between the shaft and the output flange were realigned... maybe the previous owner misaligned them and I put it back together in the same misalignment?

is there any other place this vibration could be coming from?

The vibration goes away when I let off the accelerator pedal, and it seems speed dependent.

it has been lessened somewhat by the recent work but I was really hoping it would all be gone!

any thoughts would be appreciated greatly.

by the way the info. received here really helped the work go smoothly... thanks!

jack
--
Bad Blue, '86 245, 260,000 mi., Columbus, Ohio






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.