The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Trans flush S90-V90

The kit from IPD will not work on your S90 which has the B6304 engine and the AW30-40 trans.

Just go to the hardware store and buy 4-5 feet of clear tubing that has an I.D. the same or a hair smaller than the fitting on the trans. cooler fitting. I think it's about 1 inch. Then just slide it over the fitting after you have disconnected it and snug a screw clamp onto it so it doesn't leak.

Also get stiff(rigid) vinyl tubing (from the plumbing dept.) with an O.D. slightly smaller than the I.D. of the dipstick tube, and a small funnel that will fit inside of it.

I also bought a 99 cent gallon pitcher from Wal-Mart and marked 1/4 qt. calibration marks on it. I then pump approx. 2 qts. into the pitcher, I then know exactly how much to put back in down the dipstick tube.

It's not hard, and doesn't take long. Good Luck

DEWFPO


--
1998 S90 066,800 and 1995 964 150,200






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.