The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Trans flush procedure S90-V90

posted by  someone claiming to be Paul on  Thu Jan 8 15:09 CST 2004 [RELATED]

The trans cooler is internal to your radiator. If you stand at the front of your car looking under the hood, put your left hand down over the inside of the radiator end tank and you will see where two small metal lines come straight into the radiator end tank at a screw on fittings. The top one is output of the trans cooler. You disconnect that, put the hose on there and route it down to a drain pan with capacities marked on it. The trans will only pump fluid while the engine is running, so run it long enough to get a measured amount out (say 2 quarts) then stop the engine and fill that much new fluid back in. Keep doing this until you have replaced the entire capacity of the transmission cooling system. Helps to have a second person to keep starting and stoping the car.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.