The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Something's still not right with the rear end . . . 700 1990

I wish I had a more definite question, but ...

The car is my 90 744T/M46 with about 112K. Got it thru eBay this summer and in addition to new motor mounts, I have added the following suspension mods: Cherry strut tower brace, IPD lower chassis brace & 25mm sway bars, Boge Progas shocks. One of the mounting bolts for the center support bushing/housing, and another for the differential trailing arm bushing was sheared - both were removed/replaced. The car came with (TME, I think) lowering springs which proved too harsh for city driving (Metro Chicago) and the stock springs were replaced on the rear. So what's the problem...?

The rear end does not seem tight. It handles most road irregularities OK, not great, does not change direction, but takes some (not all) bumps at speeds over 20 mph with a dull thump. I have Boge ProGas and 25mm bars on my 940, and it is very tight, so its not the Progas vs Turbogas. Local IndyShop (Bricks only) checked the bushings, says they're all decent. Short of having them all replaced, I don't know what to do. Any thoughts or experiences with "loose" rear suspension, where to look, etc., would be GREATLY appreciated. This 744T is a lot of fun to drive, and I'll be installing a Turbo+ kit this spring - I'd like to keep the rear wheels on the ground. (I've tried putting a thumb tack on the gas pedal, but even that didn't help.) Thanks ...

Jim Weiss
83 245T, 90 744T/M46, 90 760T, 93 945T, want more . . .






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.