The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

pull (nmi) 200

I've only had mine off a couple of times. I can't remember what I pulled on them with, but I just now looked at one of the old handles and sure enough it looks like it just pulls straight up. I know there isn't much space and it looks like it can't be done, but it can. Pull the plastic surrounding piece (about 3"x5") off first. This will give you a little more room. Carefully pry it off. Squeeze the top and bottom edges toward each other. That helps it clear the little tabs that hold it to the inner plastic piece. There are three plastic pieces of the same color for each handle: the little one you grab to open the door, the outer surround (about 3"x5"), and the inner "bowl" that the handle is nestled in. Good luck.
--
Thanks to everyone for the help, Doug C. 81 242 Brick Off Blocks, stock, M46; 86 244, 140k , auto.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.