The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Another thing to check... 200 1986

Nate,

Mapleleaf's comment on reversed calipers reminded me that rebuilders some times get the Left and Right halves of a single caliper paired up INCORRECTLY.

Check the TOP of each front caliper, right near the mating joint between the two halves. The surface should be free of any punch marks.

Then look up at the BOTTOM of each one. You should see a good-sized "dimple" on each half, near the joint line (within 1/2" or so).

If you DO see a dimple on the top of either half (or don't see the "match marks" on the bottom of each half), that caliper has an unbleedable lower, outside passage, which may contain trapped air.
--
Bruce Young,
'93 940-NA (current), '80 GLE V8 (Sold), '86 240dl, '85 244 ti, '83 245t
'76 244 (R.I.P at 255k), 73 142 (98K), '71 144 (ex circle track car)
Used '70 144 from '78 to '92, New 144 from '67 to '78, Used '62 122 from '63 to '67






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.