The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

allignment of dash shelf. 200

Out of alignment - is that "up/down" or "in/out"? Either way, try this:
There are 4 phillip screws that hold the entire front, including the shelf. One screw at knee level on the driver side, one on the passenger side, and 2 at the bottom front, down by the carpet, in front of the gear shift.
Loosen all four screws. Pull the shelf out far enough to make sure there are no wires (grounds, lighter, etc)in there that got pinched between metal and plastic when you replaced the bulb and reinstalled the shelf. That could throw off alignment. Make sure there's no carpet bunched up near the 2 screws at the bottom that could throw off alingment. Check each side, as the inside 'kick-panels' are also held by the side screws. With everything lined up, hold the shelf level in place. Make sure it's where you want it, then tighten the screws on the sides. Then tighten the 2 screws at the bottom. Good luck.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.