The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Eezi bleed -- tips please ? 200 1989

The only time I have removed a res to clean it well is when replacing the MC. I would just suck up what you can with a baster turkey or chicken, your preference, then clean it with some Q-tip cotton swabs.

you can let some air into the MC, but make sure you bleed it properly, it is different than the calipers. you need to push the pedal to sort of bench bleed the air out of it. what you do is remove the 2 lines, attach hoses with the kit they sell at the store, and bleed like you would a caliper but have an assistant pump the pedal until you no longer see air bubbles come out of the MC, then re-attach the hoses and bleed normally!

Failure to bleed the MC will cause premature failure.

chuck
--
'88 244 172K, '87 BMW 325e 173K (used to feed a '84 245, '84 244, '85 744)






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.