The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Discoveries on brake saga...can there be suction after pedal press? 200

i find it hard to believe the shims can cause that much difference in pedal feel. i have seen improperly installed pads do this on mercedes and bmws, but the pad has a clip on the backing plate with 3 fingers that have to fit into the piston. leave 1 finger out and the pad never fully seats against the rotor and the pedal is low and soft. the suction upon retraction is a possibility, though, i've never seen it on a volvo. the 63-82 corvettes with 4 piston calipers have a problem with exactly that, drawing air past the seals in the calipers. but, they start with a good pedal and then get worse while driving. wheel bearing runout, rotor warp, etc. jiggle the pistons back and forth and that's how the air gets in. rebuilt calipers fixes the problem on corvettes. i can't wait for this answer. still curious, chuck.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.