The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

BB in vacuum timing advance line? 140-160 1972

I got my 142 running the other night. My excitement didn't last too long, as it began to overheat quickly. I removed the thermostat, and verified coolant was being circulated, but it still overheated. I read in the Haynes manual that bad timing can cause overheating, so I thought I would begin taking a look at the timing. The first thing I checked was to see if the distributor vacuum advance was hooked up to the manifold, which it was. I removed the line and tried to blow through it, but it was clogged. I looked in the end that was connected at the intake manifold, and saw something in there. So I cut it out, and it was a copper looking ball the size of a BB. After I reconnected the vacuum line, the engine ran better and did not overheat, but it still needs adjusted.

This BB shouldn't be in there, right?

-JC






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.