The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Wiper linkage 81 245 200 1981

posted by  sejose on  Sun Feb 22 14:32 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Ok so my wipers quit on the way to work. Finally got the cam thingy back on the wiper shaft, but now I am so far unable to get the llinkage arms attached via their cable loops to the cam. I am working through the access hole in the dash, and I can just reach from beneath the dash at the same time. Must I loosen the adjust nut on the cables to get them in place on the cam then tighten? I just can't get them to go back on after the cam fell off and the wjole thing just came undone. If I must use the adjust nut, do I have to remove or at least slide back the dash to get to the ends of the linkage arms? Any point tips tricks as usual are appreciated.

Thanks

Scott in Auburn, California






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.