The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Recurrent clunk at front end drivers side 200 1989

Here’s an IPD Tech Tip for front end clunks. Maybe this will help.

Check the following first:

Front crossmember bolts (2 on each side) accessed from each side of the engine compartment. 17 mm socket, loosen one-half turn, torque to 55 ft pounds.

A-Arm front bushing bolts (2 total) accessed from under the car behind the steering rack bellows. With weighted suspension, 19 mm socket, loosen a bit, torque to 54 ft. lbs.

A-Arm rear bushing mounts, three bolts each side, 14 mm socket, loosen a bit, torque to 29 ft lbs.

Rear A-Arm nut is hard to reach, torque to 40 lbs.

My son's car clunked like crazy. It had very loose A-Arm rear bushing mount bolts. Torqued them and the clunk disappeared. Free and easy.

Good luck.
--
Thanks to everyone for the help, Doug C. 81 242 Brick Off Blocks, stock, M46; 86 244, 140k , auto.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.