The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

O/D is not functioning properly 200 1982

Since the dash light comes on, the relay and the wiring to the shifter are just fine. The dash light on your vehicle is connected after the relay parallel with the solenoid so if the dash light works, the relay is reacting properly.

And since you have checked all the connections to the solenoid, and the solenoid clicks when the shifter button is pushed, you have only two possible causes for your problem.

Low/old tranny fluid. Low/old fluid loves to get whipped into foam and an air/oil mix just doesn't work well in the OD.

The other item which can show up after about 130,000 miles is worn actuating piston seals. OD has to come of tranny, but tranny can stay in vehicle. Go to the Features at the top of a Brickboard page, click on 700/900 FAQ, scroll down to M46 tranny section and click opn the OD section. Tells you what is needed to do it yourself.

Duane






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.