The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

finding vacuum leaks with smoke generator 700

I use Propane to test for vacuum leaks (less messy than carb cleaner or other sprays). Take the nozzle tip off a propane torch and replace it with some snug fitting rubber hose about 2 feet long. Practice with the valve to get a moderate gas flow (not a roaring blast).

With the engine at a warm idle, open the valve and poke the end of the hose around each injector for a couple of seconds. If the seas leak, you should hear the engine smooth out or rev up when the propane gets sucked in and burned.

Do the same around any other suspected areas, like hidden vacuum hose ends and the intake manifold gasket area.

To block any breeze from the fan, lay a piece of cardboard from the fan shroud to the engine.
--
Bruce Young,
'93 940-NA (current) — 240s (one V8) — 140s — 122s — since '63.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.