The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

'Rust Never Sleeps' 1800

I have had remarkably good luck with POR-15. My son and I used it to coat the frame etc of a 1968 Spitefire about three years ago. We took the metal down to bright steel before applying. The product we used seemed to go on fairly thin, we used two coats. We also had the body tub sprayed with POR-15. The tub was also down to bare metal. All directions were followed very closely. So far- so good. I plan on using POR-15 on my total restoration of my 1800...
No affiliation etc. As one of the boarders says, wear old clothes and gloves! Also, this stuff is EXTREMELY dangerous to the old lungs, so wear some kind of mask, even when using a brush. If you spray, use a fresh air respirator, not just a mask. As the guy said, it didn't come off his hands for a week, and a half. Course if you can go without oxygen for a week and half...



--
Kent - too much iron, too little time






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.