The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Front cam seal - 93' 940T 900

posted by  Jim Holst on  Thu Mar 25 08:40 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Jan 4 11:05 CST 2011
[RELATED]

When I replaced mine, I did the following:
1. Removed the bolt holding the sprocket on. I used a rubber strap wrench to hold the sprocket while loosening and tightening this bolt.

2. Took off the cam cover and removed the front cam bearing cap.

3. At this point you can take out the old seal with your fingers. (no danger of nicking the seal surfaces this way)

4. Oil the new seal and slip on the camshaft into the proper location.

5. Reassemble in reverse order. I was able to reuse the cam cover seal but you might want to use a new one.

This was a very easy seal replacement.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.