The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

'73 - 144 - Finally found carburetor problem, now how to fix it 140-160

Rhys found the problem, I think. Now how to fix it.

It won't start when hot, and fuel will pool in the air filter box.

I ran it until hot, took off the air filter, shut it off, and lifted the carburetor pistons. Sure enough, quite a lot of gas was coming up into the rear carburetor, thus flooding the engine.

Rhys suggested that there may be a worn or mis-adjusted float valve. Niel suggested that the float is set too high.

By the way, should I be annoyed at the guy in Toronto who rebuilt these carburetors last fall? Or is this just something that it would take a bit of wear in to develop. (I put the car to bed a week after he rebuilt them, and only just now took it out again - winter, you know).

Ok, by 'float valve' did Rhys mean the 'needle valve', which is listed in my Haynes manual? i.e. the valve that controls the level of gas in the float chamber itself?

And how can I tell if it is the valve that is faulty, or if the float is set too high. Can the float be easily adjusted. Is this something I should do myself, given that I have only watched them take the carburetor apart, and never worked on it myself? I really don't want to throw away another couple of hundred dollars for something that I can learn to do myself.

And by the way, thanks so much for all the help I have been receiving with this problem. It is really gratifying finally to being seeing the light on this car.

Greg MacIsaac


QUOTE FROM RHYS' MESSAGE IN PREVIOUS POST:
< Sounds like a classic case of flooding due to a worn or mis-adjusted float valve. Run the engine to hot with the air filter removed. Shut it off and quickly lift and block the pistons in the carbs up. Observe the jet and needle orifice, and a see if fuel begins to ooze out of one or both of them. Having the hood open may be enough to prevent it, but you may still find the offending carb. Also the cold start enrichment system can produce too much fuel, even when off, and that may cause your hot starting problem. The fuel puddling in the air filter box is a giveaway.
This all assumes that the ignition system is strong, and the plugs are in good shape.
You can check with me directly from www.sucarburetors.com
Rhys>>






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.