The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

ocatanes 120-130

Us in the USA use an average "pump" octane spec (by law noted on pump, look) of MON+RON/2. Motor Octane Number and Research Octane Number use different methods to establish the octane rating. Typically MON is quite a bit lower (numerically) for a given blend than RON. European cars almost always specify RON for their octane ratings (especially the older cars we love).
87 "pump" octane should be OK for a normal B18B at any kind of elevation (with no head or block "skimming" or overbore). "Plus" may be required in hot, low elevation, towing, high performance applications or if the engine has been rebuilt.
Interestingly, since the thermal cycle for internal combustion is more efficient if you can run a little hotter combustion temps, polishing the combustion chambers and knocking off any sharp edges can give you some additional "resistance" to knocking under otherwise identical conditions (ceterus parabus).
Mike!






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.