The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

940 turbo won't crank/start after hot soak. 900

posted by  someone claiming to be Desperate for No Start/ Hot Soak solution on  Tue Mar 30 14:53 CST 2004 [RELATED]

My 1994 940 turbo won't start after hot soaks. Engine won't turn, dashboard lights, and the fuel pump turns on when the key is turned but no attempt to crank at all until after 30-60 minutes has past. The fuel pump relay, spark plugs, wires, distributor cap/rotor, power stage, radio suppression relay, coil, and crank sensor have all been replaced since the problem began to occur. The system ground and wire connectors for the crank sensor, IAC, temperature sensors and all the other relays previously mentioned have all been cleaned/greased and the #1 fuse has been replaced. 1 response that I received earlier suggested that the fuel pump relay be resoldered. Does that need to be done if the relay has been replaced? I'm taking any suggestions at this point. HELP!!!






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.