The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Engine Ticking 900

I had a ticking noise from my 940 1993 turbo. Was less intense when hot initially and over a period of months became more pronounced. There was a slight leak at the exhaust manifold #1 cylinder. It was real pain to repair but I did mine a couple of months ago. The FAQs have a lot of good information on this and a few searches uncovered additional good information. From my experience, in addition to the faqs;

the manifold nuts needed a 1/2" socket; you will need all sorts of extensions and sizes; one or two of the nuts were only accessible using 1/4 drive attachments. Start using release fluid for at least a week before you start the job and apply it on a daily basis.

It will be much easier to remove the oil filter adapter , but you need sockets of a size that I did not have. 29mm deep and 32 mm I believe. I did the work without removing the adapter but it was difficult and my knuckles did not thank me for it.

andrew, toronto








USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.