The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

u-joint c-clips 200

posted by  someone claiming to be chez on  Sun Apr 11 14:42 CST 2004 [RELATED]

hi,

assembly goes smoothly doing everyhting by the book. i put the cup in place. press it onto the spider using the power of a bench vice. then i press on the other cup. then i adjust the cups a little using a socket and the vice. put first c-clip on. then other one fails to go on. so i pulled the thing apart again and all needles are in place. reassemble. but this time i try and wind the cup in using the vice and a small socket with the c-clip on the cup. i managed to get it locked in a little bit but not as good as i would like. only about 1/4 of the c-clip is in the groove. i am at a loss. i will take the thing to the maechanic tomorrow and see if he can put it on the hydraulic press or tell me what is going on.

thanks for your help.

chez






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.