|
Hey guys, long time no see! I finally got my 940 running strong after almost 3 years. It turns out the head casting was the problem and it runs great with a new head and some other parts. However, it has a bad idle problem. After a hard run through first and second, it idles at 1500 rpm. if you restart the car it idles normal (750). I have checked the following...
TPS adjustment, contacts, etc. idle adjusts correctly when A/C and fan come on
Air leaks... ahh!!!! do you know how long it takes to check for any possible air leak?? ahh!!!
idle air control valve...i have put a new one in...nothing.
fault codes... 3-1-1 for the speedometer (cause its broken =) no other codes!
the car has plenty of power and runs great aside from this.
i also notice a slight, low pitched air/wind noise under boost, like it is leaking somewhere. everyone says that noise comes from the CBV gasket (i am running an older garrret setup) but i have a new gasket in there, and like i said, i checked every air leak with a torch, new lines, water, my mouth (dont ask =) and nothing =/
i want to make it to the big T bricks meet in alabama so i need your help guys. Thanks!!!!
Chris
P.S. half of the swap pics are online at
http://www.pbase.com/mmp142965/940_turbo_head_swap
|